AiPu Solids Control

Tuesday, April 17, 2018

Aipu Solids Control Manufactures different type of mud tank

Mud tank manufactured by Aipu Solids Control

Mud tank is an open-top container used to store drilling fluid on a drilling rig,made of square steel tube and plate.

The main structure of a mud tank

Body
The body of the tank is made by welding the steel plate and section, using the smooth cone-shape structure or the corrugated structure.

Ladder

Made of channel steel ,slip-resistant .

Compartment

A tank is sectioned off into different compartments. A compartment may include a settling tank, sometimes called a sand trap, to allow sand and other solids in the drilling fluid to precipitate before it flows into the next compartment.

Other compartments may have agitators on the top, which have long impellers below inserting into the tank and stirring the fluids to prevent its contents from precipitating. And mud guns are often equipped at the corners of the tanks' top, spraying high-pressed mud to prevent the drilling fluids in the corner of the compartment from precipitating, typically for the square tanks.

Guard rail

The two-sided guard rails are installed the safe suspension hook

Walkway
made of slip resistant steel plate and expanded steel plate

The following solids control equipment will be mounted on the top of mud tank,they are:

shale shaker
vacuum degasser
desander
desilter
centrifuge
mud agitator
vertical slurry pump

Shaanxi Aipu Solids Control Equipment Co.,Ltd manufacture mud tank for many years,we can design and product it according to you requirement.Welcome your inquiry.

Please visit www.aipusolidcontrol.com for more information
or Email to: tony@aipusolidcontrol.com

Thursday, April 12, 2018

4 reasons are accounted for shale shaker screen getting premature damaged

How to avoid premature damage of your shaker screen ,you need to follow 4 points listed below.

1: Problem:

Tension strength of shale shaker screen mesh is inadequate: Screen mesh is rolled up for easy transportation and storage in many cases,this will cause pressure stress on mesh inside ,tensile stress outside,furthermore, long time use will loosen the screen mesh , lessen tension strength,leading to unexpected vibration,eventually screen mesh get broken off or partly sunken.

Solution:

Enhance the tension strength of screen wire,keep screen surface leveled to reduce the pressure stress
2. Problem:

There are metal and non-metal material of it,including,low-carbon,high-carbon,high manganese steel,stainless steel etc,non-metal material including: rubber , nylon, polyurethane.If user choose not right material ,premature wear would happen.

Solution:

User should choose corresponding screen material according to mud physical property,high manganese steel is a durable material.The embed knitting method of screen mesh gives screen surface balanced pressure,and cross over point without bump,it has better working performance and longer working time.

3.

Problem:

Feeding material has high stickiness.If feeding material has high humidity and viscid,it will tightly be attached to screen mesh, heaped up on the mesh surface,leading to screen mesh damage.

Solution:

Speed up the amplitude of shaker screen,and adjust shaker deck angle,or change mesh size to solve the problem.

4.

Problem:

Too much material feeding into shale shaker at one time.Too much feeding material beyond shaker screen's processing capacity will cause damage to the screen mesh.

Solution:

Successive and equally feeding to shaker screen is suggested,always avoid too much material feeding at one time. There can be added an surge hopper to lessen the impact force feeding material brings to screen mesh. With this method,the working life of screen mesh can be prolonged.

Shaanxi Aipu Solids Control Co.,Ltd manufacture shale shaker screen for many years,and has experienced engineer to make & design durable screen mesh as much as we can.

For more information,please visit www.aipusolidscontrol.com

Email: tony@aipusolidcontrol.com

AiPu Solids Control

Tuesday, April 17, 2018